Loading...
 
Skip to main content

System Workbench for STM32

Forum List Topic List

Forums » System Workbench for STM32 » ST-Link/V2 not recognized by eclipse oxygen 3 CDT9.4 Ubuntu 16.04 VMWare guest in Win7 host
 
Thread actions
Print this page
  • Print all pages

    • ST-Link/V2 not recognized by eclipse oxygen 3 CDT9.4 Ubuntu 16.04 VMWare guest in Win7 host

    Posted by downunderthunder on 2018-04-06 11:46

    Hi,

    I am trying to use the ST-Link/V2 debugger within a Ubuntu 16.04 LTS VM Ware guest on a Windows 7 host.
    It was working some time ago.

    I am using eclipse oygen.3 CDT9.4 and the SystemWorkBench installed by using the "Install New Software" feature.

    Everything is working fine on the host system (but I don't want to work there due to other restrictions).

    The problem is:

    I can attach the ST-Link/V2 to the Linux guest machine and
    it is listed on "lsusb" but eclipse seems not be able to
    find it.
    Is there an easy way to check for the ST-Link/V2 config?
    wether it is correctly installed or so?

    BR

    Reads: 8970
    Posted by jLn_38 on 2018-04-06 14:37

    Hi downunderthunder,

    I suspect that you didn't installed the udev rules.
    Usually it comes with installer but since you have installed SW4STM32 using the update-site this step must be performed manually.

    From the doc:

    On Linux:
    The ST-Link/V2-1 is supported by libusb but the device has to be named with a udev rule.

    Download the following tarball which contains 49-stlinkv2.rules
    stlink_udev_rule.tar.bz2
    Extract the tarball into /etc/udev/rules.d under root permission
    sudo tar -xf stlink_udev_rule.tar.bz2 -C /etc/udev/rules.d


    Hope this helps.